With two-piece hooded three dimensional cut and elastic band around the face opening, the hood can better fit the shape of face and enhance the protection effect
Each seam is sealed with tape, and the waist is applied with an internal elastic band, which better enhance the seam protection and the fitness of the suit.
The cuff uses an internal elastic band to further enhance tightness and protection.
Center front zipper application allows easy put-on and take-off, while the zipper placket design brings better protection
Internal elastic band is applied to the bottom hem, with added shoe cover, which enhances fitness and protection
Needle-stitching, overlock and heat-sealing processes are applied to the connection part of the protective suits. The holes of the stitches are sealed. The stitch pitch should be 8 to 14 stitches per 3cm. The stitches are aligned are properly spaced. There shouldn’t be skipped stitch. Hot-sealed parts shall be flat and sealed without air bubbles.
The zipper of the protective clothing should not be exposed. It should be covered by flap with velcro.
The structure of protective suit should be in conformity, easy to put on and take off, and the joints must be tight.
Elastic cuffs and handles,
and elastic hood and
The protective suit is in overall structure which consists of a hooded top and pants.
At present, ethylene oxide is widely used in sterilizing medical devices.
Ethylene oxide can kill all
bacteria, viruses, etc.
The sterilized articles can be wrapped and packaged as a whole to keep them sterile before use.
Ethylene oxide does not corrode
plastics,metals or rubber, and does not cause items to turn yellow and brittle .
Ethylene oxide can sterlize items with irregular shapes and complex structures.